| CYC1-35 |
| |
 1~35kV crosslinked polyethylene insulated power cable
Main features:
This product is produced according to GB/T 12527 and GB/T14049 standard, the structure is simple, safe and reliable, and has excellent mechanical and physical properties and electrical properties. Compared with bare wire, the installation space is small, and the line and the line voltage drop is reduced. In particular, to reduce power supply accidents, to ensure that personal safety. At the same time according to user needs to design and production.
This product is suitable for high-rise building group, tourism development zone and the forest of trees and forest, 10kV, 1kV, the transmission and distribution line.
1, cable rated voltage is divided into: 1kV, 10kV,
2. The maximum allowable working temperature of the cable conductor is 70. The insulation of the cross-linked polyethylene is 90.
3. short circuit (the longest sustained 5S) the highest temperature: polyethylene, polyvinyl chloride insulation shall not exceed 160, and cross-linked polyethylene insulation shall not exceed 250.
4. cable laying, installation of the environment temperature should not be less than -20.
The minimum bending radius of 5, the installation of cable: 4D (D < 25mm); 6D (D = 25mm);
Note: D is the actual outer diameter of the cable.
1~35kV crosslinked polyethylene insulated power cable
Main features:
This product is produced according to GB/T 12527 and GB/T14049 standard, the structure is simple, safe and reliable, and has excellent mechanical and physical properties and electrical properties. Compared with bare wire, the installation space is small, and the line and the line voltage drop is reduced. In particular, to reduce power supply accidents, to ensure that personal safety. At the same time according to user needs to design and production.
This product is suitable for high-rise building group, tourism development zone and the forest of trees and forest, 10kV, 1kV, the transmission and distribution line.
1, cable rated voltage is divided into: 1kV, 10kV,
2. The maximum allowable working temperature of the cable conductor is 70. The insulation of the cross-linked polyethylene is 90.
3. short circuit (the longest sustained 5S) the highest temperature: polyethylene, polyvinyl chloride insulation shall not exceed 160, and cross-linked polyethylene insulation shall not exceed 250.
4. cable laying, installation of the environment temperature should not be less than -20.
The minimum bending radius of 5, the installation of cable: 4D (D < 25mm); 6D (D = 25mm);
Note: D is the actual outer diameter of the cable.
|
| |
| |
| |
Respected customers Hello,
Welcome to visit the company's Web site, the company dedicated
to accept your opinions and suggestions, if you are interested
in our company's products, please fill in the information below.
|
|
| |
|
| |
| |
|
Outdoor Lighting